PDS Painting Birmingham offers timber window and door painting across Birmingham, by hand, for casement and sash windows, front and back doors, internal doors and their frames. As an experienced painter and decorator in Birmingham, we know that paint on timber only lasts when the wood underneath is sound, the joints are sealed and bare timber has the right primer.
Every quote is written after a visit and lists each window or door, the preparation it needs and the paint system going on, so you can see exactly what you’re paying for. If there’s more than woodwork to do, have a look at all our painting and decorating services.
Is Your Window or Door Timber? What We Paint and What We Don’t
We hand-paint timber windows and doors only, so it’s worth checking your frames before you get in touch.
| We paint | We don’t paint |
|---|---|
| Timber casement windows | uPVC windows or doors |
| Timber sash windows | Composite (GRP) doors |
| Timber front and back doors | Aluminium or powder-coated frames |
| Internal timber and MDF doors | Metal garage doors |
| Door and window frames, sills and architraves |
Not sure what your frames are made of? Describe them when you call - if we’re not sure, we’ll check at the visit.
Timber Windows: Casements and Sash Windows
On most timber windows the paint gives up first on the bottom rail and the sill, because that’s where rainwater sits and soaks into the end grain. That’s where we spend the most preparation time, and it’s where a rushed repaint shows itself after a winter or two.
Casement Windows, Frames and Sills
Opening casements have to be painted so they still shut. We keep the paint thin on the rebates and let it cure before the window is closed tight, otherwise it sticks and tears.
Where the glass meets the frame, we carry the paint 1-2 mm onto the glass. That small line seals the glazing joint so water can’t creep in behind the paint. Sills get an extra coat, because they take more weather than any other part of the window.
If the rest of the outside is due as well, windows fit naturally into exterior house painting, with one set of access and one dry spell for the whole job.
Sash Windows in Victorian and Edwardian Homes
Box sash windows are common in Birmingham’s Victorian and Edwardian streets, from Moseley and Kings Heath to the older roads of Four Oaks. They feature in many period homes in Sutton Coldfield too.
Sashes get painted shut when paint lands on the staff and parting beads and on the faces the sashes slide against. Over decades the layers build up until nothing moves. We paint the faces you see, keep the running surfaces thin or bare, and move the sashes while the paint dries so they don’t bond to the frame.
Broken cords, loose beads and reglazing are work for a joiner or glazier rather than a painter. We’ll tell you if a sash needs a joiner before we paint it.
Front Doors, Back Doors and Internal Doors
A front door is the most-handled painted surface on a house and the first thing a visitor sees, so it needs a finish that’s hard-wearing as well as smart. Back doors take almost as much wear, and internal doors pick up knocks and fingermarks every day.
Painting a Timber Front Door
We take off or mask the ironmongery - letterbox, knocker and handles - then sand back, fill dents and splits, and prime any bare timber. The door is finished in an exterior gloss or satin, with panels, mouldings, rails and stiles painted in a set order so each wet edge joins up without lap marks.
While it dries, the door has to stay slightly open or wedged, so we agree with you before we start how the house will be kept secure. A colour change is a common request, often to a deep heritage shade. If you’d rather do it yourself, our guide on how to paint a front door yourself takes you through each step.
Internal Doors, Frames and Architraves
Internal doors are often painted along with the rest of a room as part of our interior painting and decorating work. We paint panelled and flush doors in timber or MDF, plus their frames and architraves, normally in satin or eggshell. Your quote will say how each door is to be done.
Preparation: Why Timber Paint Peels and How We Stop It
Paint on timber nearly always fails because water gets behind it, through an open joint, bare end grain or cracked putty around the glass. Once the wood beneath is wet, the paint lifts and flakes, however good the paint was. Our preparation is about keeping water out:
- Scrape off all loose and flaking paint.
- Probe the timber for soft or rotten areas, especially sills, bottom rails and joints.
- Sand back to a sound, feathered edge, and key any glossy paint so the next coat grips.
- Fill small dents and splits with exterior wood filler.
- Spot-prime bare timber, and seal knots with knotting solution so resin doesn’t bleed through.
- Seal open joints so rain can’t get in.
- Apply an undercoat.
- Finish with one or two topcoats, depending on the colour and paint system.
Soft or rotten timber is never painted over. We find it at the quote stage and tell you what it needs; if it’s beyond what preparation and filling can deal with, a joiner needs to repair it before any paint goes on.
Priming bare wood properly matters just as much indoors, and our guide to painting skirting boards and woodwork covers the same principles for interior trim. Every coat we apply goes on by brush and roller.
Paint Finishes for Windows and Doors: Gloss, Satin and Eggshell
| Finish | Look | Best for | Trade-off |
|---|---|---|---|
| Gloss | High shine | Traditional front doors and exterior frames | Shows every dent and brush mark underneath |
| Satin | Soft sheen | Modern doors and frames, inside or out | Less traditional look on period front doors |
| Eggshell | Low sheen | Interior doors and frames | Not made for outside use |
Water-based trim paints stay whiter over the years and dry faster. Solvent-based paints flow out to a harder, deeper gloss but tend to yellow indoors. Your quote names the paint system we’ll use on each window or door.
For more on sheen levels and where each one works, see paint finishes explained.
How Long Window and Door Painting Takes, and When You Can Close Them
A single front door is a very different job from every window on a Victorian semi, and the preparation each one needs varies just as much. We’ll give you a timescale with your quote, once we’ve seen the timber.
Touch-dry isn’t the same as ready to close. A door or casement shut too soon will stick and leave marks, so we let opening edges harden before they’re closed tight. Front doors are planned so your house is secure while they dry. Outside work is booked for dry spells, when the temperature is above the minimum on the paint’s data sheet.
What Affects the Cost of Window and Door Painting?
The main things that set the price are:
- the number and size of the windows and doors
- sash or casement, since sashes take longer
- the condition of the timber and how much preparation it needs
- glazing bars, which multiply the cutting-in
- access to upstairs windows, from ladders or a tower
- a colour change, and the number of coats
Once we’ve seen the windows and doors, your quote is fixed in writing. For typical figures across different jobs, see our Birmingham painter and decorator price guide.
Photos of finished windows and doors are added below as jobs are completed, or you can see more of our work across Birmingham.
What Our Customers Say
Here’s how our customers rate us on Google.
You can also read our customer reviews on our own site.
Areas We Cover for Window and Door Painting
We paint timber windows and doors right across Birmingham city, including Sutton Coldfield, with dedicated pages for these areas:
If your road isn’t listed, check all areas we cover.
Window and Door Painting Questions
Can you paint uPVC windows or doors?
No. We paint timber windows and doors only, and we don't take on uPVC work of any kind. If you're not sure whether your frames are timber, describe your frames when you call - if we're not sure, we'll check at the free visit before you book anything.
How often should timber windows be repainted?
It depends on how exposed they are and the paint system used. South- and west-facing windows take the most sun and driving rain, so they weather faster than sheltered ones on the same house. Rather than waiting for a set number of years, check the sills and bottom rails every year. Once you see cracking, flaking or grey bare wood, it's time to repaint before water gets in.
Can you stop my sash windows sticking after painting?
That's exactly what our method is for. We keep the running faces thin or unpainted, leave the beads clean and move the sashes up and down while the paint dries so they don't bond to the frame. If a sash already has broken cords or loose beads, that's joinery rather than painting, and we'll tell you before we start if it needs a joiner first.
Can you paint my front door a different colour?
Yes, and it's one of the most common requests we get. Deep heritage greens, blues and greys are popular choices on period houses. Going from a dark colour to a light one may need an extra coat for even coverage, which we'll allow for in the quote. If you'd rather tackle it yourself, our guide on how to paint a front door walks you through it.
How long before I can close and lock a freshly painted door?
Touch-dry comes well before the paint is hard enough to take a closed door pressing on its edges, and the paint's data sheet gives the times for each stage. We plan the work around that and agree with you beforehand how the house stays secure while the door dries. Our guide to how long paint takes to dry explains the difference between touch-dry and fully hard.
What do you do about rotten wood on window frames?
We look for it at the quote stage by probing sills, bottom rails and joints, and we point out any soft areas we find. Paint never goes over soft timber, because it will fail within months. Where the damage is more than preparation and filling can deal with, we'll tell you that it needs a joiner before any painting starts, so you know where you stand.
Can you paint windows and doors in winter?
Internal doors, frames and architraves can be painted at any time of year. Outside work needs dry timber, dry weather and temperatures above the minimum on the paint's data sheet, so exterior windows and front doors are planned around the forecast. In winter that can mean waiting for a settled spell, and we'll be straight with you if a job is better left until spring.